Browsing by Subject "SOIL PARAMETERS"
Now showing items 1-12 of 12
-
Appraisal of novel power-based extrusion methodology for consistency limits determinations of fine-grained soils
(Civil Engineering Research Association of Ireland, 2022)The consistency limits (liquid limit LL and plastic limit PL) are among the most commonly performed tests in geotechnical engineering practice, being used for classification of fine-grained soils and in deducing other ... -
Discussion of ?Behaviour of a foam mixture as a lightweight construction material? [Int J of Geosynth and Ground Eng (2021) 7(3), 51]
(2022)The Discussers read the Authors’ paper with interest, having recently published findings on the geotechnical behaviour/properties of clayey sand–expanded polystyrene (EPS) beads mixtures [1]. The Authors purport a ‘new’ ... -
Discussion: Development of a single-point method to determine soil plastic limit using fall¿cone data [Geotech Geol Eng 41:4473-4485, 2023]
(2024)This discussion article presents a critical appraisal of three empirical correlations developed via multiple regression analysis and presented in the Kayabali et al. [Geotech Geol Eng 41:4473–4485, 2023. https://doi.org/ ... -
Discussion: The effect of surface roughness and shear rate during fall-cone calibration
(2022)The fall-cone test is one of the most popular methods used to characterise fine-grained soils. Traditionally, the fall-cone has been used to determine the liquid limit. However, the undrained shear strength of a given soil ... -
Geotechnical properties of compacted biosolids for monofill design, As-Samra, Jordan
(2020)This paper presents the results of a comprehensive geotechnical laboratory testing for the assessment and design of a proposed biosolid monofill facility at the As-Samra Waste Water Treatment Plant (WWTP) in Jordan. Previous ... -
Improved geotechnical behavior of an expansive soil amended with tire-derived aggregates having different gradations
(2020)This experimental laboratory study examines the potential use of tire-derived aggregate (TDA) products as an additive to alleviate the inferior geotechnical properties of a subgrade deposit of clay soil with high ... -
Modeling the compaction characteristics of fine-grained soils blended with tire-derived aggregates
(2021)This study aims at modeling the compaction characteristics of fine-grained soils blended with sand-sized (0.075–4.75 mm) recycled tire-derived aggregates (TDAs). Model development and calibration were performed using a ... -
Reappraisal of soil extrusion for geomechanical characterisation
(2019)Reverse extrusion has been promoted over the past four decades for remoulded undrained shear strength (s u) measurement and consistency-limit determinations. The technique employs a uniaxial-compression test machine to set ... -
Recent advances in nature?inspired solutions for ground engineering (NiSE)
(2022)The ground is a natural grand system; it is composed of myriad constituents that aggregate to form several geologic and biogenic systems. These systems operate independently and interplay harmoniously via important networked ... -
Use of fall-cone flow index for soil classification: a new plasticity chart
(2022)Use of the Casagrande-style plasticity chart to classify fine-grained soils using Atterberg's liquid and plastic limits is ubiquitous in geotechnical engineering. This classification is dependent on the thread-rolling and ...